Tiny Modernist Cross Stitch Blog

Cross Stitch Patterns for Modern Stitchers

Leave a comment

Easter Cuties are here!


These four little cuties have arrived just in time for Easter:  A dapper bunny, cute baby chick, Mrs. Goose, and a sweet sheep!

Get all four cute Easter patterns in one easy instant download PDF. Also included are instructions on how to finish them on canvas stretchers, add ribbon and make the ribbon bows.

Click to purchase the Instant Download


Please subscribe to our new YouTube channel and stay tuned for more great videos!

1 Comment

How to Finish your Needlework in an Embroidery Hoop in 5 easy steps

We are excited to present our first Cross Stitch Tutorial on YouTube!

We are making simple and easy cross stitch tutorials for beginners and intermediate stitchers.

Please subscribe to our new YouTube channel and stay tuned!

1 Comment

What are people stitching up these days?

I’m always curious and wildly overjoyed to see what people do with my patterns. Maybe it’s geeky of me – but this afternoon I googled “Tiny Modernist”, and found so many images of beautiful stitching! These are some of the wonderful creations made by other people, using Tiny Modernist CS patterns:

1 – This Autumn TMCS freebie was stitched up by Creative Thread. It looks soooo cute! I love it 🙂

2- This one is the Tiny Modernist Anchor stitched by The Stranded Stitch. It’s so simple, clean, and lovely! Amazing work!

3 – This is definitely an interesting one – the majority of the stitching is from a freebie by Brooke Nolan, but Jutta from Fabric and Needle blog, added the spools and scissors from my free Sewing Room pattern in the bottom left-hand corner of her stitching. Looks so cute! And major points for creativity!

4 – Last but not least, here is the Tiny Modernist Vintage Typewriter, sent in by a reader on the DMC Portugal blog. I love it framed in a hoop like that!

Do you have a Tiny Modernist creation that you’d like to share? I would loooove to see it! Please email me at cheryl@tinymodernist.com


How to make a cross stitch pillow cushion

This cross stitch tutorial will show you how to sew a fun and easy fabric pillow to showcase your finished cross stitch.

If you want to follow along using the Cross Stitch pattern featured in this tutorial, you can purchase the Retro City Pattern here.

retro city pillow

Material List:

Your finished cross stitch design (on aida cloth, evenweave, linen etc.)

Cotton Fabric (or any fabric of your choice- try corduroy, denim, twill, or any other woven fabric. I don’t recommend using stretchy or knit fabric, as it will be quite difficult to sew to your aida cloth)

Fabric Scissors 

Sewing Machine (Highly recommended. You can sew it all by hand, but it will take much longer!)

Matching sewing thread (I used white)

Straight Pins (optional, for pinning cotton to aida cloth for sewing)

steam iron

Hand sewing needle (only needed at the end)

Stitching Instructions:

Complete all cross stitching before assembling the pillow 🙂

Step 1- Choose your fabric. I tried to find a cotton that picked up the colors and shapes found in the cross stitch design. But feel free to use a solid fabric, or mix-up prints on the front and back. Be creative! If you want to use the same cotton fabric as I did, it’s from this collection by Maude Asbury.

retro city image

Step 2- Cut down your aida cloth to the size you want. You will need a 1/2″ for seam allowance on every side (7 stitches on 14-count aida), so take that into account when trimming down your aida cloth.

This one ended up being 6″ x 13″, including seam allowance (you should leave about 2-3″ of aida cloth around your stitching at the very least)


Step 3- Now let’s make the (2)  two pattern pieces. Either make them first on paper, cut out, and then trace onto your fabric. Or, you can draw this diagram right onto your fabric using the measurements given below. That’s what I did. Just make sure not to get pencil marks on any part of your fabric that will show on the pillow!

IMPORTANT TIP: Place two (2) layers of fabric together, lay your pattern pieces on top (or draw diagram lightly in pencil) and cut through both layers at once. This saves time 🙂

Make your (2)  two pattern pieces like this:

pillow pattern pieces

Step 4- Cut (2) two SIDE pieces and (2) two TOP & BOTTOM pieces. You should now have (4) pieces of cotton fabric altogether.

Step 5- With Right Sides (RS) together, line up the short edge of one of the Top fabric piece with the top edge of your stitching piece.  

Using your sewing machine, stitch across the top with a straight stitch, backstitching at either end to secure your thread. Make sure to start and end 1/2″ from each edge, so there will be seam allowance on the angled sides.  (see photo below)

IMPORTANT SEWING TIP: When stitching these seams on your machine, place the cotton fabric on the bottom and the aida cloth on the top. It will be much easier to sew. If you try sewing with the lighter, stretchier cotton on top, you will end up stretching it out of shape, and it will be difficult to match the sewing edge to the aida cloth.


Step 6- Sew each of the remaining (3) three pieces onto your aida cloth as in Step 5. It should now look like the photo below.


Step 7- Join the angle (mitred) edges of cotton with Right Sides (RS) together. Begin stitching from the previous  stitching line out to the outer edge of cotton.

A good trick is to slowly lower your needle into the hole of the first stitch of the previous stitching line. That makes sure there will be no gaps between stitching in the final pillow cover.


Step 8- Snip the corners so they will lie flat. Don’t snip your stitches! Just cut close the stitching line, but not too close.

Step 9- Press the seam allowances open using your steam iron.


Step 10- You should now have completed the Top Pillow Piece. The hard part is over, good job!


Step 11- Cut another piece of fabric exactly the same size as the top piece. No need to measure it out- just lay the Top Pillow Piece onto the cotton fabric and cut around it with fabric scissors. This is the Bottom Pillow Piece.

Step 12- Place Top Pillow piece and Bottom Pillow Piece with RS together. Pin if you need to. Sew all around the edges with a 1/2″ seam allowance (1/2″ SA), leaving a 3-4″ hole in the bottom side.

Step 13- Stuff the pillow with polyester stuffing. Easy.

Step 14- Hand-stitch the opening closed using a small whipstitch.


That’s it! You’re all done. Now sit back and enjoy your handiwork 🙂



How to make a Cross Stitch Needle Case

This cross stitch tutorial will show you how to make a simple and beautiful keepsake cross stitch needle book or needle case.

The finished dimensions of this needle case are 3″ x 4″ when using 14-count aida cloth, but you can adjust the sizing up or down by changing the thread count or using a different fabric (linen, or another evenweave, perhaps?).

Experiment and have fun with it!

needlecase views

Material List:

Your finished designs (you can find the needle book used in the tutorial here)

14-count Aida Cloth (or Linen, if you prefer)

Embroidery Needle

Embroidery Floss

iron-on interfacing

steam iron


Fabric Scissors or Pinking Shears

Stitching Instructions:

Step 1- Complete all cross stitching on your needle case. You should have 2 finished pieces of aida cloth: 1 outside piece, and 1 inside piece. They should be exactly the same size.

Step 2- Count 2 rows from the edges of your finished outside piece, and backstitch a border around the design. Stitch the same size backstitch border on the inside piece of your needle case. This creates your sewing edges for assembly.

Step 3- Trim the aida cloth around each piece, leaving approximately 1/2″ of fabric (on 14-count, this works out to 7 squares) from the backstitched sewing line on all sides.


Step 4- Cut your interfacing to be exactly the same size as your backstitch lines. Using an iron, fuse the interfacing to the wrong side of your aida cloth on both pieces.


Step 5- Trim off the corners.


Step 6-  Fold back the edges along the sewing line on all pieces, pressing down with your fingers.


Step- 7 Make a knot using 2 (two) strands of embroidery floss the same color as your backstitching line. Start sewing the outside and inside pieces together using a whip-stitch, as you would for a biscornu (not sure how to do this? Read the biscornu tutorial here). Do this by taking a stitch under one of the backstitched threads on the outside piece, then one on the inside piece, and so forth. Continue stitching until all 4 sides are stitched together. I take a few extra stitches at the corners, for stability. And it looks nice, too.


Step 8- Cut a piece of felt to be slightly smaller than the needle case. I used regular scissors, but you can also use pinking shears to give the felt a nice edge. 


Step 9- Stitch along the centre of the felt, through all layers of fabric. You may choose to use a sewing machine for this step, or sew it by hand using a small straight stitch or backstitch. (I used white felt, and hand-sewed using a backstitch with white thread, so the stitching line would be less visible.)


Step 10- Make the thread ties: Cut 2 lengths of 6-strand embroidery thread 10″ long. Fold one length in half, so there is a loop on one side and 2 thread ends on the other. Thread the ends through a large needle. Run the needle through all layers on the front edge of your needle case. Pull the 2 ends through the loop and pull tightly so it fits snugly on the side of the needle case. Tie a knot in the ends of the thread to keep the two loose ends together. Repeat with other 10″ length, attaching it to the back of the needle book. Once attached, these 2 strings can be tied in a little bow to keep the needle book closed.


Congratulations! You now have a beautiful keepsake needle book!

1 Comment

How to make a Tassel

This cross stitch tutorial will show you how to make an embroidery thread tassel.

Material List:

Embroidery Needle

Embroidery Floss

Small Scissors

1.5″ wide Ruler or piece of cardboard  



Step 1- Wrap embroidery thread around a ruler or piece of card (approx. 1.5” wide) about 20 times. Cut the end of the thread.

(Make a larger tassel by using a wider piece of card/ruler and wrapping more thread around it.)


Step 2- Cut a second piece of embroidery thread 14” long. Fold in half. Thread the folded end of the second string under the loops, so that there is a loop on one side and two tails on the other side.


Step 3-  Pull the 2 tails through the loop, and tighten.

Step 4-  Slide the loops off of the ruler or card.


Step 6-  Cut another piece of white thread (14” long). Make one end of thread into a loop shape, then lay loop on tassel. Wrap the other end tightly around tassel several times. Pass end of thread through loop and gently close loop, making a knot.


Step 7- Trim tassel ends evenly.


Step 8-  Your tassel is ready! Thread top threads onto a needle, and attach to your project.